RC review plz!

Talk about anything and everything. Try not to kill each other!
Sphinx
FWG King
Posts: 690
Joined: 02 Sep 2009, 09:32
Location: Somewhere

RC review plz!

Postby Sphinx » 27 Jun 2011, 13:08

hai thar,could sumone plz review a Brama 10B 4WD Electric Buggyfor me?u can get it for 169$ at amazon and i thought it would be a great starter buggy.if sumone could review teh speed,quality,etc,etc,etc,etc,etc,and etc.lawl,i dont know anyone who knows much bout this stuff but yeah
kind of like the leader in here#3494

User avatar
Zados
FWG Mod
Posts: 789
Joined: 02 Sep 2009, 09:05
Location: on tour

Re: RC review plz!

Postby Zados » 27 Jun 2011, 13:12

the chassis tends to break if you offroad to hard but most of em do in this price-league

funny thing: its bout 100 US$ more in germany -.-
R.I.P. Dad ... you'll never be forgotten!

User avatar
Shadow00

Re: RC review plz!

Postby Shadow00 » 27 Jun 2011, 13:29

HPI Racing 1/10 scale electric powered, radio controlled, ready to run HPI Brama 10B Off-Road Buggy.
Chassis: Plastic bathtub type 0.079" (2mm) thick
Drive: Four wheel shaft
Radio: HPI TG-1 27MHz AM pistol grip radio system with SG-1 standard steering servo
Electronic Speed Control: EN-1 with reverse
Motor: HPI Saturn 35 turn for extended run time with preset mounting positions making gearing changes easier
Charger: AC wall type
Battery: 7.2V 1500mAh NiCD 6-cell stick pack with Standard connector, battery compartment will hold stick or side by side packs
Shocks: Composite bodied oil filled
Gearboxes: Closed
Differentials: Front and rear bevel-type
Transmission: Single-speed with steel dogbones
Tires: HPI Digger stud type, hard compound for any type of off-road surface
Wheels: White plastic seven spoke, Front 1.2" (30mm) wide, 2.2" (56mm) diameter, Rear 1.4" (35mm) wide, 2.2" (56mm) diameter
Spur Gear: 65 tooth plastic
Pinion Gear: 24 tooth metal
Bumpers: Nylon front
Body: Pre-painted polycarbonate with molded nylon wing and preapplied decals
Suspension: Nylon double wishbone
Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver
Warranty: Two year limited, valid only in the U.S.A., Canada and South America

AA Batteries: 8 for transmitter
Misc. Items: Track equipment

VEHICLE-
Length: 15.3" (390mm)
Width, 9.8" (250mm)
Height: 4.7" (120mm)
Weight: 3.4lbs (1545g) including battery and body
Wheelbase: 10.5" (266mm)
Gear Ratio: 6.86: 1
Tread: Front- 8.5" (217mm)
Rear - 8.46" (215mm) center of tires, side to side
Track: Front- 9.5" (242mm)
Rear- 9.6" (244mm) outer edges of tires, side to side
BODY-
Length: 10.1" (258mm)
Width: 5.6" (143mm)
Height: 3.7" (93mm)

Hope i helped.Have fun!

Sphinx
FWG King
Posts: 690
Joined: 02 Sep 2009, 09:32
Location: Somewhere

Re: RC review plz!

Postby Sphinx » 27 Jun 2011, 13:55

Shadow00 wrote:HPI Racing 1/10 scale electric powered, radio controlled, ready to run HPI Brama 10B Off-Road Buggy.
Chassis: Plastic bathtub type 0.079" (2mm) thick
Drive: Four wheel shaft
Radio: HPI TG-1 27MHz AM pistol grip radio system with SG-1 standard steering servo
Electronic Speed Control: EN-1 with reverse
Motor: HPI Saturn 35 turn for extended run time with preset mounting positions making gearing changes easier
Charger: AC wall type
Battery: 7.2V 1500mAh NiCD 6-cell stick pack with Standard connector, battery compartment will hold stick or side by side packs
Shocks: Composite bodied oil filled
Gearboxes: Closed
Differentials: Front and rear bevel-type
Transmission: Single-speed with steel dogbones
Tires: HPI Digger stud type, hard compound for any type of off-road surface
Wheels: White plastic seven spoke, Front 1.2" (30mm) wide, 2.2" (56mm) diameter, Rear 1.4" (35mm) wide, 2.2" (56mm) diameter
Spur Gear: 65 tooth plastic
Pinion Gear: 24 tooth metal
Bumpers: Nylon front
Body: Pre-painted polycarbonate with molded nylon wing and preapplied decals
Suspension: Nylon double wishbone
Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver
Warranty: Two year limited, valid only in the U.S.A., Canada and South America

AA Batteries: 8 for transmitter
Misc. Items: Track equipment

VEHICLE-
Length: 15.3" (390mm)
Width, 9.8" (250mm)
Height: 4.7" (120mm)
Weight: 3.4lbs (1545g) including battery and body
Wheelbase: 10.5" (266mm)
Gear Ratio: 6.86: 1
Tread: Front- 8.5" (217mm)
Rear - 8.46" (215mm) center of tires, side to side
Track: Front- 9.5" (242mm)
Rear- 9.6" (244mm) outer edges of tires, side to side
BODY-
Length: 10.1" (258mm)
Width: 5.6" (143mm)
Height: 3.7" (93mm)

Hope i helped.Have fun!

all i rly wanted to know was the speed...


anyway,i changed my mind nao,i wanna get a Bandit Extreme Buggy

its only 15$ more,and the reviews says its runs over 60 kph!thts so awesome for under 200$ :D


hopefully it lasts for at least a year
kind of like the leader in here#3494


Return to “General Chat”

Who is online

Users browsing this forum: No registered users and 49 guests